Tag Archive for Volt

Run Your DC with a Chevy

Run Your DC with a ChevyGeneral Motors (GM) is using Chevy Volt batteries to power a data center. MLive reports that expired lithium-ion batteries retrieved from Chevrolet Volt’s help power the General Motors Enterprise Data Center at the Milford Proving Grounds in Milford, MI.

GM logoGM recently announced that five batteries from first-generation Volts are working in parallel with a 74-kilowatt solar array and two 2-kilowatt wind turbines to green up the data center. The batteries have the capacity to provide backup power for four hours in the event of an outage, GM said. According to the article, the set-up has given the Enterprise Data Center a net-zero energy use on an annual basis, and extra power will be sent back to the grid used by the Milford Proving Ground.

First-gen Chevy Volts still have a lot of juice

As it readies to sell its all-new, second-generation Volt, GM said first-gen cars still have a lot of leftover juice in their battery packs for stationary use. Pablo Valencia, GM’s senior manager of battery life cycle management, said in a presser that the batteries still have value after they come out of the car.

Chevy Volt batteries to power a data center.Even after the battery has reached the end of its useful life in a Chevrolet Volt, up to 80 percent of its storage capacity remains … This secondary use application extends its life, while delivering waste reduction and economic benefits on an industrial scale.

The first-generation plug-in hybrid Volt went on sale in 2010 for the 2011 model year. It uses battery power to get an electric range of about 35-38 miles, before switching to gasoline.

Battery powered carThe 2016 Volt, unveiled last January in Detroit, will have about a 31% greater electric range than its predecessor. The second-gen Volt has about a 50-mile, all-electric range, and a total driving range of about 400 miles when combined with a gasoline engine.

Rb-
According to the Detroit News, GM is working with unidentified partners to validate and test systems for other commercial and non-commercial uses. 

Elon Musk‘s Tesla (TSLA) is also leveraging its car-based battery systems to develop a line of storage batteries designed for homes and SMB’s called Powerwall. Powerwall is designed to store electricity for home use, to be used during peak consumption times when utilities charge the most. The device comes in several colors including white, charcoal, red, and blue. There are two options — a 7-kilowatt-hour package using nickel-manganese-cobalt batteries and a 10 kilowatt-hour unit with a nickel-cobalt-aluminum battery.

 

Related articles

 

Ralph Bach has been in IT long enough to know better and has blogged from his Bach Seat about IT, careers, and anything else that catches his attention since 2005. You can follow him on LinkedInFacebook, and Twitter. Email the Bach Seat here.

Car Technology

GM Ventures Invests in Powermat

GM logoXconomy – Detroit reports that GM Ventures, the Detroit -based car maker’s venture capital arm has invested $5 million in Powermat the Commerce Township, MI start-up. A multiyear, multimillion-dollar deal with Powermat gives General Motors (GM) exclusive rights to place the company’s portable-device charging technology in its cars for a year. according to Micky Bly, the company’s director of hybrid vehicles. The Chevy Volt and certain Cadillac models will be the first GM cars to the Powermat accessories. The New York Times reports that at this year’s CES GM demonstrated four wireless charging positions in the Chevy Volt.

GM Ventures has also invested in Indiana-based electric car startup Bright Automotive and Ann Arbor-based battery developer Sakti3. Also, see this earlier post.

Car Theft by Antenna

Keyless entryMIT’s Technology Review reports that researchers at ETH Zurich in Switzerland have successfully attacked passive keyless entry and start systems from eight different car manufacturers’. The researchers examined 10 car models from eight manufacturers. They were able to take all 10 by intercepting and relaying signals from the cars to their wireless keys because the key transmits its signals up to around 100 meters. The attack works no matter what cryptography and protocols the key and car use to communicate with each other.

The researchers tested a few scenarios. An attacker could watch a parking lot and have an accomplice watch as car owners entered a nearby store. The accomplice would only need to be within eight meters of the targeted owner’s key fob, making it easy to avoid arousing suspicion. In another scenario, a car owner might leave a car key on a table near a window. An antenna placed outside the house was able to communicate with the key, allowing the researchers then to start the car parked out front and drive away.

The researchers concluded that manufacturers will need to add secure technology that allows the car to confirm that the key is in fact nearby.

New Standard for Automotive-Grade Wireless Modules

Connected carSierra Wireless (SWIR) recently introduced what the firm calls, the industry’s first suite of embedded wireless technology modules designed specifically for automotive manufacturers. The Canadian firm is banking on the emerging trend to include telematics, infotainment, navigation assistance, and remote diagnostics in new cars within the next few years according to an article on ITNewsLink.com. The firm believes these applications will need reliable built-in connections to cellular networks. The new Sierra Wireless modules will use 2G and 3G network technologies and frequency bands used worldwide to provide the connectivity customers are demanding.

The manufacturer says these units are the first wireless modules developed from the ground up to achieve compliance with automotive specifications.  ITNewsLink.com says the Sierra Wireless AirPrime AR Series design encompasses:

  • Tolerance for up to 1,000 thermal shock cycles
  • Full certification with ISO 9001:2000 quality standards and ISO/TS 16949:2002 manufacturing processes
  • Extended operating temperature range from -40 to 85 degrees Celsius
  • Compliance with multiple automotive manufacturing and quality processes including AQPQ, PPAP, PCN, and 8D
  • Solder-down form factor and optional Embedded SIM to create a more reliable and less expensive solution
  • An open platform for custom application development, including dedicated APIs for telematics applications.

Wireless Car Sensors Vulnerable to Hackers

Wireless Car Sensors Vulnerable to HackersMIT’s Technology Review reports that hackers could “hijack” the wireless pressure sensors built into many cars’ tires, researchers have found. Criminals might then track a vehicle or force its electronic control system to malfunction, the University of South Carolina and Rutgers University researchers say. The team successfully hijacked two popular tire-pressure-monitoring systems (TPMS).

As automakers add more technology and computers to cars and connect those computers to critical components, in-car systems will need to be secured against hackers, experts warn.

The systems tested by the South Carolina-Rutgers team had very little security in place–they mainly relied on the communications protocol is not widely published. “In doing TPMS this way, [automakers] have left the door open to wireless attackers,” says Travis Taylor, one of the researchers. The team could eavesdrop on communications and, in some circumstances, alter messages in transit. That let the team give false readings to a car’s dashboard. They could also track a vehicle’s movements using the unique IDs of the pressure sensors, and even cause a car’s ECU to fail completely.

“Normally, these [attacks would] result in small problems,” Mr. Taylor says. “But I see practical danger and damage that can happen from TPMS exploitation.” “The security and privacy problems that the researchers identify in TPMS systems are likely just one among many that will challenge the automotive industry in the years to come,” says Stefan Savage, a UC San Diego professor of computer science and engineering.

Ford Installs Sync Software via Wi-Fi

Ford Installs Sync Software via Wi-FiThe Detroit Bureau reports that Ford is the first automaker to use Wi-Fi to send software to vehicles along an assembly line. The automaker is sending infotainment software to Wi-Fi enabled MyFord Touch-equipped vehicles like the Edge.

Ford installed  Wi-Fi technology at its Oakville, Ontario, plant where it builds the Ford Edge and Lincoln MKX. Next up for Wi-Fi updates will be the upcoming Ford Explorer, built in Chicago, and then plants that build the Focus around the world.

Wi-Fi capability eliminates the need for building, stocking multiple SYNC hardware modules, thus reducing manufacturing complexity and saving cost.  “Using wireless software installation via Wi-Fi, we can stock just one type of SYNC module powering MyFord Touch and loaded with a basic software package,” explained Sukhwinder Wadhwa, SYNC global platform manager. “We eliminate around 90 unique part numbers, each of which would have to be updated every time a change is made – this system really boosts quality control.”

“Turning an assembly plant – with steel beams everywhere and high-voltage cabling throughout; everything you could imagine that would interfere with a radio signal – into an access point that would achieve 100 percent success was a huge challenge,” Mr. Wadhwa said.

Related articles

Ralph Bach has been in IT long enough to know better and has blogged from his Bach Seat about IT, careers, and anything else that catches his attention since 2005. You can follow him on LinkedInFacebook, and Twitter. Email the Bach Seat here.

GM Recycles BP Gulf Oil Spill Waste Into Volt

General MotorsGM Recycles BP Gulf Oil Spill Waste Into Volt (NYSE: GM) has intercepted 100 miles of used oil control booms from the BP Gulf of Mexico mega oil spill, (which I wrote about here, here, here, and here) preventing them from going into landfills. Instead, TheDetroitBureau.com reports that oil-soaked booms are transformed into plastic parts for the Chevy Volt.

chevy_volt_logoMike Robinson, GM vice president of Environment, Energy and Safety policy explained to TheDetroitBureau that the automaker has been able to recycle the polypropylene plastics used in the oil booms set out to contain and capture the oil spilled by a runaway British Petroleum (BP) well. GM and its suppliers are turning the recycled material into plastic parts used in the Volt, such as a shroud for the radiator according to GM. “Creative recycling is one extension of GM’s overall strategy to reduce its environmental impact,” Mr. Robinson said, the Detroit-based automaker already finds ways to cut landfilling at 76 of its facilities. The recycling of Gulf oil booms, he added, “is a good example of using this expertise and applying it to a greater magnitude.”

In the article, Chris Miller vice president of sales and market for GDC Inc. says the old booms are mixed with other recycled material, including used tires, and processed to yield a plastic resin which can be shaped into a variety of plastic parts. “The recycled resin is a lot less expensive than virgin resin,” he said. In fact, GM’s Robinson described the overall process as “cost-neutral,” meaning the final parts and components cost the same as those produced by more conventional processes.

Recycling the booms will result in the production of more than 100,000 pounds of plastic resin for the vehicle components,” said John Bradburn, manager of GM’s waste-reduction efforts, eliminating an equal amount of waste that would otherwise have been incinerated or sent to landfills. “This was purely a matter of helping out,”  Mr. Bradburn told TheDetroitBureau. “If sent to a landfill, these materials would have taken hundreds of years to begin to break down, and we didn’t want to see the spill further impact the environment. We knew we could identify a beneficial reuse of this material given our experience” Mr. Bradburn added.

bp_oil_spill_booms

GM’s Bradburn says the project demonstrates the booms, which are also widely used around construction projects and limited spills, don’t have to be buried or burned but can be recycled. He also noted it should encourage the manufacturers of the booms to make them easier to recycle.

TheDetroitBureau says besides GDC, GM worked with several partners throughout the recovery and development processes. Heritage Environmental managed the collection of boom materials along the Louisiana coast. Mobile Fluid Recovery stepped in next, using a massive high-speed drum that spun the booms until dry and eliminated all the absorbed oil and wastewater. Lucent Polymers used its process to then manipulate the material into the physical state necessary for plastic die-mold production.

rb-

Hmm- something must be changing at GM, when I worked at the GM tech center in the 1990s there were not many green efforts. Even if this is a marketing ploy to beef up the Volt’s green-cred’s, it is a good step. Let’s hope they keep up the imaginative thinking.

Related articles

 

Ralph Bach has been in IT long enough to know better and has blogged from his Bach Seat about IT, careers, and anything else that catches his attention since 2005. You can follow him on LinkedInFacebook, and Twitter. Email the Bach Seat here.